Oraimo EasyCut OCL-230: 3mm–13mm Guards and Adjustable Blade Guide

Updated 10 October 2026. This article explains how to use EasyCut’s length controls before attempting a close haircut. This practical guide uses exact Oraimo models instead of transferring one clipper’s characteristics to the entire product family.

Grooming products and latest-listed Kenya prices

Click the images to shop each model

Detailed care, buying and use guidance

Use the lever and guards for different purposes

Oraimo specifies a 4-position adjustable taper lever offering about 0.5 to 2mm blade settings, plus clip-on combs for 3, 6, 9 and 13mm lengths. The lever fine-tunes the cutter; the guard provides a safer, larger cutting length. Beginners should start with the longest guard before making any shorter change.

The manufacturer lists a 7000RPM motor

Motor RPM is only one element of how a clipper feels on dense hair. Blade sharpness, correct guard installation, slow overlapping passes and ordinary maintenance also matter. The 2,000mAh battery is rated for up to about 2.5 hours, with about 3.5 hours required to recharge.

A practical beginner haircut sequence

Comb and dry the hair according to the manufacturer’s guidance. Begin with the 13mm attachment and remove bulk gently, then step gradually to 9mm for the sides only if a shorter length is desired. Use a mirror and help for the back of the head, and avoid the closest lever position near skin folds.

Keep the cutting kit hygienic

The official package includes comb attachments, cleaning brush, charging cable and lubricating oil. Brush out hair after each use, lubricate as instructed and do not immerse the electric body in water. Allow tools to cool and inspect the blade after extended cutting.

Which grooming tool is appropriate?

A haircutting clipper is often most useful when removing bulk hair; a beard trimmer provides more precise detailing, and an electric shaver aims for a closer finish. The model you choose should match the actual job. Price and colour can affect preference, but the blade type, guard accessories and comfort matter more in daily practice.

Always follow hygiene instructions, especially if several people use the same tool. Never continue using a blade that is damaged, visibly corroded, misaligned or pulling hair. Charge according to the original guide, avoid water around powered chargers, and treat every quoted battery-life figure as a laboratory estimate rather than a guarantee.

How to use guide lengths without guessing

The EasyCut’s four guards offer specified cutting lengths of 3, 6, 9 and 13mm. Those measurements refer to the guiding attachments, not the precise lever setting. A 13mm guard can be a sensible way to remove bulk while retaining room to shorten later. The four lever positions, which Oraimo describes in approximately the 0.5–2mm range, refine the bare cutting length. Different attachments and hair direction affect the practical result.

The safest learning method is gradual. Start with a clean comb and a longer guard; cut a small section and check from several angles. Proceed to a shorter size only after confirming the shape. Avoid using a near-zero blade gap on folded or irritated skin. If you need a high-precision fade for an event, asking an experienced barber may be more reliable than attempting it immediately before the occasion.

After cutting, brush away hair and use the maintenance oil according to the manufacturer’s instructions. The included cleaning brush and attachments are part of the ownership experience, not merely optional extras. Never submerge the electric body unless explicitly specified; EasyCut’s stainless-steel blade is not a statement that its entire handle is waterproof. Charge the clipper using the correct cable and storage conditions.

Frequently asked questions

Is the 0.5mm lever setting the same as a 3mm guard?

No. The lever changes the blade’s close-cut setting, whereas guide combs control longer cutting lengths.

Which Oraimo product should I choose for home use?

Start with the grooming job and how often you will perform it, then check the available guards, blade type and model code.

Can I use every clipper blade directly against skin?

No. Close-contact settings require care, particularly around sensitive skin. Follow the product’s safe-use guide.

Do these devices need regular maintenance?

Yes. Remove trapped hair, clean and lubricate only as instructed, and inspect attachments before use.

Are product prices fixed?

No. The figures reflect Infinite Tech’s listed retail prices checked 10 October 2026. Visit the WooCommerce listing for final checkout price.

Has Infinite Tech physically tested these exact tools?

No firsthand testing is claimed. This buyer guide uses documented manufacturer specifications and retail listings.

How do I purchase in Nairobi?

Use the linked model page, choose the available version and confirm checkout, delivery and warranty details.

Related Oraimo buying guides

Best Oraimo grooming accessories · Full Oraimo price index · SmartClipper 2C guards and fades.

Research basis

Product data is drawn from official Oraimo manufacturer information and Infinite Tech’s connected WooCommerce catalogue. This editorial content is not a claim of original barber testing or nationally measured bestseller status. Verify current inventory, model code and package contents before purchase.