HAVIT HC03 Hair Clipper Kenya: Guide Combs, Cleaning and Care

The HAVIT HC03 is a rechargeable hair clipper in Infinite Tech’s November 2026 catalogue, supplied with four guide-comb sizes, a cleaning brush, lubricating oil and a USB charging cable according to the distributor listing. For a Kenyan buyer grooming at home, the useful questions are which comb gives the desired cutting length, how to avoid nicking skin, and how to care for the blade and battery. This guide uses the exact supplier specifications rather than inventing a blade material, waterproof rating or motor durability test.
HAVIT HC03: documented specifications
| Item | Supplier description |
|---|---|
| Exact model | HAVIT HC03 |
| Current WooCommerce retail price | KSh 2,995 at inspection |
| Advertised motor | 3.7V, 6,300rpm |
| Rechargeable battery | 3.7V / 1,200mAh |
| Comb guides | 3mm, 6mm, 10mm, 13mm |
| Listed accessories | Four limit combs, cleaning brush, lubricating oil and USB cable |
| Blade description | Fixed-pitch blade; specific metal/coating not established |
| Waterproofing or full-wash claim | Not specified |
These are distributor specifications, not a certified cutting-performance test. Shop prices may change; the live WooCommerce listing is final.
Choosing a 3mm, 6mm, 10mm or 13mm guide
Clipper guide sizes generally describe approximate hair length left when used as intended, not the exact final length on every hair type. The HC03 package is described as including four guide combs. Start with the longer 13mm guard if uncertain, then move shorter after checking the result. Cutting too short is much harder to reverse than making another careful pass. The correct attachment must lock securely before switching on the motor. A loose or wrong-sized guard can catch hair or detach during use.
A first-use checklist
- Inspect the clipper, cable and blade for visible damage, and check the model label.
- Charge using the manufacturer-approved USB input; the distributor doesn’t specify every supported fast-charge protocol.
- Clean and dry hair as recommended by the actual manual; avoid wet-operation assumptions where no waterproofing is documented.
- Fit the longer guide first and make gentle passes in the appropriate direction for the hairstyle.
- Keep moving the clipper rather than pressing one section of skin repeatedly.
- For sensitive areas, use good lighting and stop if the blade pinches, snags or overheats.
How to avoid pulling and uneven cutting
A blunt, dirty or poorly lubricated blade can pull rather than cut, and a discharged battery can cause inconsistent motor operation. Make sure the selected guard seats fully and remove loose hair from the blade region according to the manufacturer’s care instructions. Different hair textures and lengths can require slower or more frequent passes. The 6,300rpm label is a motor-speed claim, not a promise that it cuts every density without snagging. If cutting performance drops, clean the safe accessible areas and inspect the blade rather than forcing the device harder against the skin.
Cleaning and blade care
The catalogue lists a cleaning brush and lubricating oil, suggesting a maintenance process, but it doesn’t say the entire clipper can be immersed or rinsed under running water. Disconnect the appliance from charging power before cleaning. Remove detachable guides only as the manual allows and clear visible dry hair with the supplied brush. Use the approved blade lubricant sparingly where indicated, keeping oil away from electrical connectors. Do not open a sealed battery compartment or use solvents on the housing. If the clipper has developed corrosion or emits unusual heat, stop use and arrange proper service.
Charging and storage
HC03’s 1,200mAh rating is a battery-capacity figure, not a verified runtime in minutes. The November price list does not give an independently measured cutting time or exact charging duration, so don’t make up a “three-hour runtime.” Avoid storing a lithium-powered clipper in a hot vehicle, using it with a damaged cable, or placing it near water while charging. For longer storage, follow the manufacturer’s battery care guidance and keep the cutting head protected from impact.
Should you use it for facial hair too?
Hair clippers and precision beard trimmers can have different blade clearances and guard designs. The HC03 is described as a hair clipper; the supplier sheet does not establish a close-shave attachment, nose trimmer, body-grooming protection or waterproof beard-trimmer operation. Before using it on sensitive facial or body areas, verify the maker’s intended use and recommended guard. Avoid sharing blades without appropriate cleaning and hygiene practices.
Frequently asked questions
Are the guide combs included?
The supplier lists 3, 6, 10 and 13mm guides among the package accessories. Confirm the actual box contents at purchase.
Can I wash HC03 under a tap?
No waterproof/washable-body certification is stated; clean according to the specific user manual, not assumptions.
How long does one battery charge last?
The distributor lists 1,200mAh but not a reliable tested use time. Verify current manufacturer specifications.
Shop HAVIT grooming products in Nairobi
See the HAVIT HC03 hair clipper product listing, browse the HAVIT personal and home appliances guide or the HAVIT Kenya directory. Infinite Tech is at Rehema House, Standard Street, First Floor Shop 2, Nairobi CBD; call 0720 450 148 for current price, included guides and stock.
Source: HAVIT November 2026 supplier catalogue, page 10; WooCommerce item #97204. The safety and care notes are general and do not supersede the exact user manual.